Design

The design is the most important step in creating an automated irrigation system. The project is made by our specialists, observing all the requirements and standards to enable irrigation system to function properly.
• The first and most important thing before proceeding to the design of irrigation systems is to have a landscape design is available, or to know what will be the architecture of the garden. This is necessary because the irrigation system is being built to benefit the landscape, and choosing the type of watering is depending on the location of the bush in groups of green areas. For each type of vegetation is necessary to apply the appropriate method of irrigation - for trees, shrubs and flowers - drip irrigation, and for lawns - through sprinklers.
• The next step is to specify the water source to link irrigation system. To function properly and sprinklers can cover parameters set by the manufacturer, it is necessary water pressure to be a minimum of 3.0 bar. Note also that as a better flow of the water source, as lower will be your investment. If the parameters of the water supply is not sufficient need to proceed with the selection of hydrophore.
• Once you have clarified the issues in the first two points should design the system.
Broad product range RAIN BIRD, providing the designer flexibility in choosing the type of sprinklers, according to area and size of irrigated area.
Depending on water source and size of garden irrigation system is divided into sectors. Each sector is managed by a solenoid valve that is inserted by a programmer.

 Design of irrigation system